Encore Wire's NM-B PCS Building Wire
- rebeccavanessendel
- Jul 8
- 2 min read
For Residential Wiring of Luminaires, Devices, and Appliances
Encore Wire's NM-B PCS is constructed with one cabled pair of 16 AWG signal and control cables for 0-10v lighting control applications. The multiple signal/control bundles eliminate the need for additional independent signal/control cables and reduce dependence on Wi-Fi controls which can be intermittent and are subject to security concerns. NM-B PCS's unique design features our SuperSlick Elite® technology.
Features
Applications
Type NM-B (Non-metallic sheathed cable) has a broad range of usage as defined in Article 334 of the National Electrical Code (NEC). Type NM-B cable is commonly used for residential wiring of luminaires, devices, and appliances. Type NM-B ampacity limitation shall be in accordance with the 60°C conductor temperature rating, as specified in the NEC. Type NM-B is rated 600-volt for both exposed and concealed work in normally dry locations. Type NM-B may be installed or fished in air voids and joints and in masonry block or tile walls where such walls are not exposed to, nor subject to, excessive moisture or dampness. Designed for use with LED and Fluorescent dimming systems and smart building technology. NM-B-PCS eliminates the need to install separate low-voltage cable and traditional power NM cable to a single luminaire.
Assembly
Both 2- and 3-conductor constructions have the insulated conductors cabled with a bare copper ground wire wrapped in fire-retardant paper and Class 2/3 signal bundle.
(1) SuperSlick Elite Color-Coded PVC Jacket
(2) Treated Paper Separator
(3) Nylon Jacket
(4) PVC Insulation
(5) Annealed Solid Copper Conductor
Construction
Conductors
Solid 14-10 AWG soft, uncoated copper, per ASTM-B3; Class 2 and Class 3 - Solid 16 AWG soft, uncoated copper, per ASTM-B3
Insulation
Color-coded Polyvinyl Chloride (PVC) compound meeting the required thickness of Type THHN or THWN-2 with a heat-stabilized Nylon jacket rated for 90°C in dry locations.
Grounding Conductor
Soft, uncoated copper per ASTM-B3
Class 2 and Class 3 Conductors
Color-coded (purple/pink) 16 AWG twisted jacketed pair with 600V insulation. The National Electrical Code (NEC) and UL 719 permits electric light and power circuits conductors in an NM-B Cable with class 2 and class 3 circuits in accordance with NEC Article 725 Section 136(I)(1).
Jacket
A 30-mil, color-coded, flame retardant and moisture resistant PVC jacket is applied over the completed assembly as follows: 14 AWG White | 12 AWG Yellow | 10 AWG Orange
Power-Flo Technologies is proud to partner with Encore Wire as they continually examine their processes and products searching for changes that improve their campus, community, and the overall environment. Encore Wire’s NM-B PCS cable brings together convenience, safety, and cutting-edge technology to streamline modern lighting control installations. Its integrated 0-10V signal/control pair eliminates the need for separate low-voltage cabling, while its durable, code-compliant construction and SuperSlick Elite® technology ensure easy installation and reliable performance. Designed with today’s energy-efficient lighting systems and smart building technologies in mind, NM-B PCS offers a future-ready solution for residential and commercial applications alike. With its UL listing, RoHS compliance, and NEC alignment, NM-B PCS sets a new standard for performance and versatility in structured wiring.